Exmark Lazer Z E-Series with 25.5 HP* Kawasaki FX801V Engine and 60“ UltraCut Series 4 Deck LRE801GKA604A3
|
|
|
Specifications
|
Model |
Lazer Z E-Series
|
Category Name |
Lawn / Garden
|
Year |
2026
|
|
Sale Type |
New
|
Manufacturer |
Exmark
|
UPC |
LRE801GKA604A3
|
|
Speed |
11 mph
|
Fuel Capacity |
9.5 gallon
|
Acres Per Hour |
5.32
|
|
Coverage In Acres |
5+
|
Cutting Height Range |
1.5" - 5.5"
|
Price |
Contact for price CAD
|
|
|
|
Description
Discover the Exmark Lazer Z E-Series Mower
As the most affordable model in the Lazer Z line, the all-new 2025 Lazer Z E-Series delivers an unbeatable combination of cut quality, productivity, durability and value. Select from 48-, 52-, or 60-inch UltraCut Series 4 cutting decks, all equipped with a newly redesigned discharge chute that distributes clippings over a wider area. A choice of twin-cylinder Kawasaki, Kohler, or Vanguard twin-cylinder commercial engines are available, all equipped with heavy-duty external air filters. Power is delivered through unitized Hydro Gear pump and motor units for up to 11 mph forward ground speeds. A new full-suspension operator seat increases operator comfort during long work days.
Like our entire lineup of zero-turn mowers, the Lazer Z E-Series delivers unmatched durability and long-term value. Be sure to check out the rest of the Lazer Z family, including the Lazer Z S-Series zero-turn mower.
|
|
|
|
FEATURES
|
Features
Unibody Frame
The Lazer Z E-Series utilize a one-piece unibody frame that delivers increased durability with fewer parts –– a classic case of “less is more”.
|
Less Time At The Pump
Lazer Z E-Series models feature a single 9.5-gallon fuel tank with a single fill loca
|
Ultracut Series 4 Deck
Built from formed and welded high-strength steel, UltraCut Series 4 full-floating decks feature maintenance free spindles with splined blade drivers to stop bolt tightening on impacts. The idler arm pivot bearings are also maintenance free.
|
Tool-less Belt Removal
The deck and hydro belts can be installed and removed without tools.
|
Reduced Maintenance
With just two annual grease points and maintenance-free sealed bearing spindles, the Lazer Z E-Series delivers maximum performance with minimum maintenance.
|
|
|
EQUIPMENT
|
Equipment
| Item |
Details |
| UPC |
193308242224 |
| Width / Cutting Deck |
60" |
| Drive |
Hydro-Drive |
| Starter |
Electric |
| Steering Control |
Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
| Caster Forks |
.50" thick caster yoke arms. |
| Front Caster Tires |
13 x 6.5-6, smooth tread, pneumatic. Sealed ball bearings. |
| Drive Tires |
24 x 12-12, 4 ply Super Turf TL |
| Safety Package |
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
| Parking Brake |
Lever actuated internal wet disc brake |
| Tractor Frame |
Unibody, welded, heavy-duty 1.5" x 3" tubular steel. |
| Blade Spindles |
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver. |
| Electrical |
12-volt battery with 15-amp alternator. |
| Standard Features |
Engine hour meter and cup holder |
| Seat |
Deluxe suspension seat, foam flip-up armrests, and integral safety switch. Adjustment: Fore and aft from operator's position. |
|
|
POWER COMPONENTS
|
Power_Components
| Item |
Details |
| Engine Brand |
Kawasaki® |
| Transmission Speeds |
Infinitely Variable |
| Engine Model |
FX801V |
| Engine Displacement |
852cc |
| Engine Series |
V-Twin |
| Fuel System |
Carbureted |
| Speed |
Infinitely variable speed selection from 0–11.0 mph forward, 0–6.0 mph reverse. |
| Engine Spec |
FX801-AS31-R |
| Engine Speed |
3750 RPM |
| Air Filter |
Heavy-duty canister air filtration system |
| Fuel Capacity |
9.5-gallon single fuel tank with single fill location |
| Drive Description |
Dual Hydro-Gear ZT-4400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
| Fuel Type |
Gas Carbureted |
| PTO Engagement |
MagStop Electromagnetic 175 ft-lb clutch with spot brake |
| Drive Wheel Release |
Allows unit movement without engine running. |
| Fuel Indicator |
Mechanical float |
| Deck Lift |
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
| Carb Compliant |
No |
| ROPS |
2-post foldable ROPS standard with seat belt and latch. |
|
|
DECKS
|
Decks
| Item |
Details |
| Deck Style |
Floating Deck |
| Deck Style Description |
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. |
| Deck Construction |
10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt, and 7-gauge reinforcement plate welded to spindle mounting locations for improved strength. |
| Cutting Heights |
1.5" to 5.5" in 0.25" increments |
| Blade Tip Speed |
Approximately 18,500 fpm |
| Blades |
3 blades at 20.50" Length |
|
|
DIMENSIONS
|
Dimensions
| Item |
Details |
| Width |
72.7" |
| Height |
70.1" |
| Curb Weight |
1080 |
| Length |
84.6" |
|
